FUSION TECHDYNAMICS Talk to our engineers
Engineering services

One team for every stage of your product.

Bring us one discipline or the whole system. We cover feasibility, detailed engineering, prototyping, integration, testing and manufacturing handover.

8 disciplines1 accountable teamSketch → tested system

The stack behind our work

  • SolidWorks
  • Fusion 360
  • Altium Designer
  • KiCad
  • STM32
  • ESP32
  • NVIDIA Jetson
  • Embedded Linux
  • PX4 & ArduPilot
  • ROS 2
  • OpenCV
  • PyTorch
  • React
  • Flutter
  • Node.js
  • TIA Portal
  • MATLAB
  • GNU Radio
  • C / C++
  • Python
What we can do for you

Eight disciplines, one accountable team.

Every discipline below is handled by the same team, so mechanics, boards, firmware, AI and software are designed together from day one.

Injection-moulded enclosure parts beside a circuit board
Discipline 1 of 8

Mechanical design

Enclosures and physical products designed alongside the electronics, ready for manufacture.

  • Industrial design and 3D CAD
  • Embedded-product enclosures and mounting
  • Thermal, tolerance and assembly considerations
  • 3D printing, CNC and rapid prototyping
  • Injection-moulded part design
  • Draft, wall thickness, ribs, bosses and snap fits
  • DFM review and manufacturing handover
  • Prototype-to-production design iteration
SolidWorksFusion 3603D printingInjection moulding
Close-up of a compact circuit board
Discipline 2 of 8

Electronics & PCB design

Schematics, layout and bring-up for digital, analogue, power and mixed-signal boards, up to 8 layers.

  • Architecture, schematics and BOM optimisation
  • High-speed interfaces and controlled impedance
  • Power integrity, grounding and EMC-aware layout
  • DFM, DFA and design-review packages
  • Prototype bring-up and fault diagnosis
  • Manufacturing files, test points and fixtures
  • Library and lifecycle management
  • 2-, 4-, 6- and 8-layer boards
Altium DesignerKiCadEasyEDALTspice
Family of embedded controllers and gateways on a bench
Discipline 3 of 8

Embedded systems & IoT

Reliable connected hardware, from board bring-up and firmware to secure communications and telemetry.

  • MCU firmware, drivers, bootloaders and RTOS
  • Embedded Linux, Yocto, BSP and device drivers
  • ESP32, STM32, Nordic, Raspberry Pi and NVIDIA Jetson
  • IoT gateways, MQTT, BLE, Wi-Fi and cellular
  • Edge-AI embedded products
  • Battery management systems and power electronics
  • Sensor integration, data logging and OTA updates
  • Production test firmware and diagnostics
C/C++FreeRTOSEmbedded LinuxYoctoMQTTJetson
Vision processor board held beside a camera lens
Discipline 4 of 8

AI engineering

Practical AI that moves from data and prototype to monitored deployment on edge devices or secure infrastructure.

  • OpenCV and real-time computer vision
  • Deep learning model design and optimisation
  • Object detection, tracking and visual inspection
  • NLP and document intelligence
  • LLM applications, RAG and private knowledge systems
  • AI agents with controlled tools and workflows
  • Edge deployment, quantisation and acceleration
  • Evaluation, observability and human review
OpenCVPyTorchTensorRTLLMsAI agentsNLP
Dashboard shown on a laptop and tablet
Discipline 5 of 8

Software & apps

Secure web and mobile software that connects users, devices and operations, through to cloud deployment.

  • Responsive web applications and business portals
  • Android, iOS and cross-platform mobile apps
  • UI/UX design, prototypes and design systems
  • IoT dashboards and device-control applications
  • APIs, databases and cloud integrations
  • Admin panels, analytics and reporting
  • Authentication, role-based access and audit trails
  • Testing, deployment, monitoring and maintenance
ReactFlutterPythonNode.jsREST APIsCloud
Small multirotor on an avionics hardware-in-the-loop test bench
Discipline 6 of 8

Aerospace, UAV & test

Avionics integration and verification for unmanned aircraft, proven on hardware-in-the-loop test benches.

  • End-to-end UAV avionics architecture design
  • Power, data-bus and interface-control design
  • Flight-control, navigation and payload integration
  • PX4, ArduPilot and ROS 2 integration
  • Systems engineering, MBSE and requirements
  • Quality assurance and configuration management
  • Verification, validation and traceability
  • HIL/SIL, three-axis rate-table and fault testing
PX4ArduPilotSimulinkSysMLHIL / SIL
Industrial control cabinet with PLC, wiring and an operator screen
Discipline 7 of 8

SCADA, PLC & automation

Control systems that make operations visible, repeatable and safe, from field devices to operator screens.

  • Siemens, Allen-Bradley and Mitsubishi PLCs
  • SCADA, HMI and alarm-management design
  • VFD, motor-control and instrumentation integration
  • Industrial networks and protocol gateways
  • Data acquisition and historian integration
  • Control-panel and I/O documentation
  • Factory and site acceptance support
  • OT cybersecurity and access segmentation
TIA PortalStudio 5000WinCCModbusOPC UA
RF test antennas, cables and a spectrum display on a lab bench
Discipline 8 of 8

RF & signal processing

Signal acquisition, spectrum analysis and RF subsystem development for sensing and communications.

  • SDR prototyping and digital signal processing
  • Modulation, filtering and feature extraction
  • Antenna integration and link-budget analysis
  • RF front-end and mixed-signal integration
  • Spectrum analysis and coexistence testing
  • GNU Radio and Python signal pipelines
  • Shielded-lab verification support
GNU RadioSDRMATLABPythonDSP
How we can work together

Pick the engagement that fits.

Start small to prove the risky part, go end to end, or add one of our specialists to your own team.

Start small

Feasibility sprint

Define the requirements, investigate the risk and prove the critical technical path.

  • Requirements defined with you
  • The riskiest part investigated
  • The critical technical path proven

Best when the idea is new or the risk is unclear.

Start with this
End to endGo end to end

Complete product build

A milestone-based engagement from architecture through integrated prototype and validation.

  • Architecture across every discipline
  • Integrated prototype, milestone by milestone
  • Validation on our own rigs

Best when you want one team to own the whole system.

Start with this
Add capacity

Dedicated discipline

One of our specialists (PCB, firmware, AI or software) working inside your team.

  • A specialist in PCB, firmware, AI or software
  • Works inside your team and tools
  • Backed by the rest of our engineers

Best when your team needs one more expert.

Start with this
How we work

From your idea to a tested system.

The same team takes your system through every stage, so nothing gets lost between vendors.

Engineers reviewing a 3D enclosure model beside a circuit board
Step one

Tell us what you need

Share your idea, requirements or the problem you're trying to solve. Our engineers review the use case, constraints and risks with you.

You geta reviewed use case, constraints and risks

Enclosure parts and a circuit board laid out
Step two

We build it together

Mechanics, boards, firmware and software come together in one integrated prototype, milestone by milestone.

You getone integrated prototype, milestone by milestone

RF test bench with antennas and a spectrum display
Step three

We prove it and hand over

We validate on our own rigs and hand over the files, the test evidence and the manufacturing pack.

You getthe files, the test evidence and the manufacturing pack

Bring us the problem. We'll engineer the system.

Whether you need one discipline or a complete product, talk it through directly with our engineers.